The Pros And Cons Of Pvf Brake Lines

Your vehicle’s brake lines play a meaningful role in the functionality of your vehicle as well as your personal safety

If your vehicle needs new brake lines, you should give serious consideration to the PVF variety. Below, we provide a look at the benefits and potential flaws with PVF brake lines.

PRO: DURABILITY

A PVF brake line is covered in a polyvinyl fluoride coating during production. This protective coating is baked and subsequently cured to the steel line. The end result is a very durable coating that does not flake or chip and successfully guards the line against corrosion and rust. In short, this type of brake line will stand the test of time, providing protection against the elements no matter how bad the weather gets.

CON: BENDING AND FLARING CAN BE CHALLENGING

The use of the polyvinyl fluoride coating makes it somewhat challenging to performing bending and flaring. By performing your own brake line replacement, you might end up stripping some of the coating from the area to be flared in an attempt to make the project slightly easier. The downside to such an action is it decreases the protection against rust that otherwise would have been provided by the entirety of the PVF coating.

PRO: IDEAL FOR COLD WEATHER ENVIRONMENTS

If you live in or near the Rust Belt, you should lean toward PVF or nickel-copper brake lines. The protective coating on PVF brake lines helps protect your brake system against rust, corrosion, and other damage.

CON: SUSCEPTIBILITY TO DAMAGE DURING INSTALLATION

If you are not careful during the installation process, you will likely cause at least minor damage to your PVF brake line. The flexibility of PVF lines creates the potential for significant damage amidst the installation process. Exercise caution, and you won’t end up putting dents or creases in the line. In particular, it is important to be careful when using brake pliers and other tools necessary to create tight bends. Sealing this variety of brake line requires minimal torque compared to that required for steel lines, so if you are not careful, you might end up crushing the flares with a tube nut by mistake.

PRO: JUST FLEXIBLE ENOUGH

Though it will take some work to flare and bend your vehicle’s new brake lines, you shouldn’t have to expend too much energy or invest an abundance of time to add PVF lines in the proper manner. While the steel variety is extraordinarily difficult to flare and bend, PVF is just soft enough to permit the proper manipulation without an abundance of time or effort. This slight softness should not be confused with weakness. Even if you are new to DIY auto maintenance, you will find bending and flaring PVF brake lines is easy enough.

CON: MORE EXPENSIVE THAN STEEL BRAKE LINES

It is often said that you get what you pay for. Top-notch materials are not cheap. PVF brake lines are likely to cost more money than brake lines comprised of non-coated steel lines and those coated with zinc. However, PVF brake lines are worth the money as they last that much longer than traditional steel brake lines, ultimately reducing the frequency of replacement, saving you more money in the long run.

Brake System University is a micro site giving advice, reviews, and technical information on various brake system components like brake lines, brake line repair cost, and ABS sensors. Brake System University connects you to high quality, genuine brake system replacement parts including  replacement brake lines, ABS sensor replacement brake line replacement kit that have been tested and reviewed by experts. If you want to replace any component of your brake system, then this site(https://brakesystems.autopartsu.com/) will helps you in choosing the right component. Brake System University connects you to trusted reviews and referrals to help you easily make a purchase decision.

License: You have permission to republish this article in any format, even commercially, but you must keep all links intact. Attribution required.