What Kind Of Surface Is Safe To Clean Using Water Blaster?

You might be aware of how improved technology has been for the past few years, but the sole purpose of the improvements they have made on the technology is still the same; to make things easier for us to use. Just like how home cleaning used to be difficult and boring, now they invent water blaster to make it easier for us to clean almost everything in our environment. With the pressure added into the water, we can easily remove even the most difficult stain and the most stubborn dirt on even the hardest surface. However, is it really perfect for any place? Or is there any place or surface that you shouldn’t clean with water blaster? What kind of place or surface that is safe for you to clean using water blaster? Keep reading this article to find out!

Deck

Should you water-blast it? The answer is yes. Decks are usually made from South American hardwoods like Camaru, Ipe and Tigerwood which can withstand the power just fine. Also, if the decks are made of pressure-treated wood, you can actually water-blast it as well, as long as you don’t hold the nozzle too close. Pressure-treated wood is typically southern yellow pine, which is pretty soft, so you should start with a low-pressure nozzle on an inconspicuous spot to make sure the spray is not etching or marking the wood.

Well, what about roof?

Absolutely, no. You might want to blast away unsightly moss and algae with a water blaster because it is easy to wash away the accumulated dirt on the roof; however, water-blasting your roof is dangerous and can cause damage. I will especially never recommend using water blaster when you are perched on a ladder because the blowback could throw you off balance. The power in the water stream can loosen roof shingles and, with asphalt shingles, strip them of the embedded granules that help extend the life of your roof. Instead of using water blaster, use a pump sprayer containing a 50-50 mixture of bleach and water to clean your roof and wash away mold and moss.

Car

Don’t ever water-blast a car. Let me tell you that. Water-blast a car is dangerous both for your safety and the car quality. The pressure in the water can damage or nick the paint, which could lead to rust. And a car wash usually gets the job done just fine; therefore, use a garden hose and soapy sponge. Use a little elbow grease and a specialized cleaner on problem spots such as wheels.

Concrete walkway and driveway

For this one, you can and even should wash it with a water blaster. The strength in concrete can withstand a cleaning method that uses power or pressure without problems. That being said, a finer nozzle can be more effective for spot-cleaning grease stains. You can use water blaster with lower pressure for moldy or mildew-covered cement and coat the surface in suds first.

Cleaning with water blaster is so much easier and fun only if you use it properly and on proper places. Remember that in order to clean more effectively, you should pay attention to safety first. Use safety glasses, safety gloves, a pair of boots, long pants and wear clothes that cover most areas of your body. Also, make sure you are using it at the right distance. Therefore, your cleaning experience will be more efficient and effective.