Tips For Maintaining Your Flat Roof

When you are living in a house, it becomes the source of your shelter. Roofs are of two types, Flat Roofs and pitched roofs. Flat Roofs are known for their space saving, compact design. They are very effective for small structures like extensions, dormer, and garages. A Flat Roof is actually a horizontal base that is fixed to the building’s ceiling and is covered with a waterproof membrane. In order to drain the rainwater from the roofs, it is slightly pitched by a couple of degrees.

Nowadays, people go for Flat Roofing because it is both efficient and economical. It saves the homeowner or a commercial building owner a lot of money and energy. The construction of it involves less labor as compared to pitched roofs. Flat Roofs have longevity, but only when they are carefully and properly maintained.

Here are few preventative maintenance tips to protect your Flat Roof:

Inspect it regularly: Flat Roofers suggest that you must inspect your roof every few months. Inspect for holes, tears, and loose seams on an asphalt-roll roof. Also, look carefully for rust and pitting on a metal roof. If you notice anyusual cracks, then add patches to prevent leaks. Look at the edges of the flashing and make sure that water does not seep under it.

Carefully check the Gutters: Gutters are made to keep the roof clean from water clogging. The concept of eaves through is that the water must come downwards through the pipes so that the roofs remain clean and dry. Flat Roofers always remind the homeowners that they must keep the gutters clean and so that debris, leaves or any other kind of materials do not block the flow of watered from the eaves. So, maintaining a proper gutter system is a good way to protect your Flat Roofing.

Check the flashings: A proper flashings can protect your roof. It adds a finished look to our roofs and also protects us from wind and insects. The main purpose of installing flashings is to keep the roof watertight. Flashings are one of the most important roofing components, but sometimes it is ignored or poorly installed. But, it is a tip for the homeowners, to maintain a proper flashings for a long-lasting and water light roof. Flashings can become damaged or get corroded as they are made of metals. Ensuring that the metals of flashings are in top shape will help you protect your roof structure in the long run.

Get a thermal Imaging done every year: You can get a thermal Imaging done for your roofs after a storm or in case you notice a leak in your roof. Infrared helps to locate wet insulation in most flat roofs. It also helps to narrow the search for a possible leak source. Through infrared scanning you can easily find problem wet areas in the roofing system and accordingly get the spot repaired as soon as possible. Modern Flat Roofers conduct Thermal Imaging because it is very quick and accurate.

The device records hot and cold spots at typically vulnerable parts of a ceiling such as the corners of the roof. After that it sends a computer read out giving the roof specialists a non-invasive look. Through Thermal imaging you can really safe your flat roofing as it is cost effective and also very functional.