How To Fix Wavlink Extender Firmware Failure Issues?

We hope you know how essential it is to update the firmware on the networking devices. Although firmware updates on the devices are a pretty easy task, still users may sometime get stuck in between. If you can not update the firmware on your Wavlink WiFi range extender via ap setup Wavlink page, then use the hacks given in this guide to resolve the issue. You are going to find the topmost working hacks to fix the issue in no time. Keep on reading further to know more about it.

Wavlink Extender Firmware Update Failed [Fixed]

1. Check Power Supply

In case the power supply to the Wavlink wireless range extender is not stable then also you will fail in updating its firmware. So first of all, check the power supply. See if the power socket into which the extender is plugged is damaged or if the power cable is loose. Make the required changes right away and ensure that the extender is receiving an optimum power supply.

2. Verify Internet Connection

One more cause that is responsible for failing in updating the firmware on the extender is a faulty and shaky internet connection. Perhaps this is the same reason for your case as well.
Contact your internet service provider to confirm the same. Also, check the connection between the extender and the router. Look at the Ethernet cable if you have used one. It has to be free of damage.

3. Examine the Firmware File

Are you trying to update the firmware on your Wavlink extender using the manual process? Yes? Perhaps you are trying to install the wrong file on your extender which is why the process is getting halted.
Different extender models have different firmware releases. So you need to be very careful while downloading the firmware file keeping in mind the Wavlink extender model number that you own.

4. Do Not Interrupt the Process

After you have downloaded the firmware file on your PC, you need to install it on your extender. While the device is getting updated, you need to be careful that the firmware update process does not get interrupted. If it does, this may harm your device rendering it useless. The firmware may also get corrupted. To avoid all of this mess, make sure that you do not interrupt the process while it is in progress.
We hope you have already taken care of an unstable power supply and shaky internet connection which are the most common reasons for interruption in the process. Now, make sure not to do any other activity online or open a new tab. Always remain on the same page during the process.

5. Use the Correct Steps

While you are updating the firmware on your Wavlink wireless extender ensure to use the correct steps. If you miss any step or perform any step incorrectly, then also you will not be successful in getting the job executed smoothly. So, access the Wavlink login page to reach its settings and then install the firmware on your device.

Wrapping Things Up

We are sure that after you are done following the hacks given in this guide, you will be able to update your Wavlink extender without any hassle. The firmware update will help to improve the performance of the extender and also add new features to it. You also add more security to it. Thus, every time you see an update ready to be done on your Wavlink extender, get it installed on your device right away.